CJ2M

مدیر

4 سال پیش

بعد از کاربردهای موفق سری CJ1 و پیشرفت تکنولوژی، نسل جدید PLC های ماژولار امرن به نام CJ2M تولید شدند که کاملاً سازگار با نسل های قبلی و در عین حال بسیار پیشرفته است. در حال حاضر، CJ2 به عنوان جانشین نسل قبلی، این فناوری اثبات شده را با تنوع بیشتر پردازنده، سرعت و حافظه بیشتر و رابط های ارتباطی متنوع تر، ترکیب می کند. CJ2 حاصل سالها تجربه به عنوان رهبر بازار در زمینه کنترلر های ماژولار است. این سری از PLC امرن عملکرد بیشتر و پاسخ سریع تر ورودی/خروجی و همچنین مقیاس پذیری زیادی را ارائه می دهد. علاوه بر این، برنامه نویسی، اشکال یابی و شبکه، سریعتر و آسان تر شده است.

جدول مشخصات فنی این Expansion ها به شرح زیر است :

CJ2M

CJ2M-CPU35	CJ2M-CPU34	CJ2M-CPU33	CJ2M-CPU32	CJ2M-CPU31	CJ2M-CPU15	CJ2M-CPU14	CJ2M-CPU13	CJ2M-CPU12	CJ2M-CPU11	Model
2,560	2,560	2,560	2,560	2,560	2,560	2,560	2,560	2,560	2,560	I/O Point/40 Units (3 Expansion Racks Max)
60K steps	30K steps	20K steps	10K steps	5K steps	60K steps	30K steps	20K steps	10K steps	5K steps	Program Capacity
DM:32K words, EM:32K words/Bank *4 Bank	DM:32K words, EM:32K words/Bank *4 Bank	DM:32K words, EM:32K words/Bank *1 Bank	DM:32K words, EM:32K words/Bank *1 Bank	DM:32K words, EM:32K words/Bank *1 Bank	DM:32K words, EM:32K words/Bank *4 Bank	DM:32K words, EM:32K words/Bank *4 Bank	DM:32K words, EM:32K words/Bank *1 Bank	DM:32K words, EM:32K words/Bank *1 Bank	DM:32K words, EM:32K words/Bank *1 Bank	Data Memory Capacity
8K words	8K words	8K words	8K words	8K words	8K words	8K words	8K words	8K words	8K words	Data Tracing Memory
1 Mbyte	1 Mbyte	1 Mbyte	1 Mbyte	1 Mbyte	1 Mbyte	1 Mbyte	1 Mbyte	1 Mbyte	1 Mbyte	Source/Comment Memory
2,048	2,048	256	256	256	2,048	2,048	256	256	256	Function Block Definition
2,048	2,048	256	256	256	2,048	2,048	256	256	256	Function Block Instance
20K Steps	20K Steps	20K Steps	20K Steps	20K Steps	20K Steps	20K Steps	20K Steps	20K Steps	20K Steps	Function Block Program Area
Yes (with EtherNet/IP Functionality)	Yes (with EtherNet/IP Functionality)	Yes (with EtherNet/IP Functionality)	Yes (with EtherNet/IP Functionality)	Yes (with EtherNet/IP Functionality)	No	No	No	No	No	Built-in-Ethernet
Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Built-in-USB
No	No	No	No	No	Yes	Yes	Yes	Yes	Yes	Built-in RS-232 Port
Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Communication Option Board Slot
40 ns	40 ns	40 ns	40 ns	40 ns	40 ns	40 ns	40 ns	40 ns	40 ns	LS Instruction Execution Time
Supported *	Supported *	Supported *	Supported *	Supported *	Supported *	Supported *	Supported *	Supported *	Supported *	Pulse I/O add-on modules
No	No	No	No	No	No	No	No	No	No	Synchronous Unit Operation
Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	User-defined Data Structure**
906284.5 mm	906284.5 mm	906284.5 mm	906284.5 mm	906284.5 mm	903184.5 mm	903184.5 mm	903184.5 mm	903184.5 mm	903184.5 mm	Unit Size(HxWxD)

General Specifications

CJ2M		Item
CPU3	CPU1	Item
Mounted in a panel	Mounted in a panel	Enclosure
Less than 100 Ω	Less than 100 Ω	Grounding
90 mm × 75 mm × 62 mm	90 mm × 75 mm × 31 mm	CPU Unit Dimensions
190 g or less *2	130 g or less	Weight *1
5 VDC, 0.7 A	5 VDC, 0.5 A	Current Consumption
0 to 55°C	0 to 55°C	Ambient Operating Temperature
10% to 90% (with no condensation)	10% to 90% (with no condensation)	Ambient Operating Humidity
Must be free from corrosive gases	Must be free from corrosive gases	Atmosphere
−20 to 70°C (excluding battery)	−20 to 70°C (excluding battery)	Ambient Storage Temperature
2,000 m or less	2,000 m or less	Altitude
2 or less: Conforms to JIS B3502 and IEC 61131-2.	2 or less: Conforms to JIS B3502 and IEC 61131-2.	Pollution Degree
2 kV on power supply line (Conforms to IEC 61000-4-4.	2 kV on power supply line (Conforms to IEC 61000-4-4.	Noise Immunity
Category II: Conforms to JIS B3502 and IEC 61131-2.	Category II: Conforms to JIS B3502 and IEC 61131-2.	Overvoltage Category
Zone B	Zone B	EMC Immunity Level
Conforms to IEC60068-2-6 5 to 8.4 Hz with 3.5-mm amplitude, 8.4 to 150 Hz Acceleration of 9.8 m/s2 for 100 min in X, Y, and Z directions (10 sweeps of 10 min each = 100 min total)	Conforms to IEC60068-2-6 5 to 8.4 Hz with 3.5-mm amplitude, 8.4 to 150 Hz Acceleration of 9.8 m/s2 for 100 min in X, Y, and Z directions (10 sweeps of 10 min each = 100 min total)	Vibration Resistance
Conforms to IEC60068-2-27 147 m/s2, 3 times in X, Y, and Z directions (100 m/s2 for Relay Output Units)	Conforms to IEC60068-2-27 147 m/s2, 3 times in X, Y, and Z directions (100 m/s2 for Relay Output Units)	Shock Resistance
5 years at 25°C	5 years at 25°C	Battery : Life
Approx. 10 g	Approx. 10 g	Battery : Weight
CJ1W-BAT01	CJ1W-BAT01	Battery : Model
Conforms to cULus, NK, LR, and EC Directives.	Conforms to cULus, NK, LR, and EC Directives.	Applicable Standards

Performance Specifications

CJ2M	Item
CJ2M-CPU1 / CPU3	Item
CPU11/31 : 5K steps CPU12/32 : 10K steps CPU13/33 : 20K steps CPU14/34 : 30K steps CPU15/35 : 60K steps	User Memory
2,560 bits	I/O Bits
Normal Mode: CJ2M-CPU3@: 270 μs * CJ2M-CPU1@: 160 μs * * The following time must be added when using EtherNet/IP tag data links for the CJ2M-CPU3@. 100 μs + (Number of words transferred × 1.8 μs) The following time must be added when using Pulse I/O Modules with a CJ2M CPU Unit: 10 μs × Number of Pulse I/O Modules	Overhead Processing Time
Basic Instructions : 0.04 μs min. Special Instructions : 0.06 μs min.	Execution Time
Interrupt task startup time: 31 μs Return time to cyclic task : 10 μs	I/O Interrupts and External Interrupts
Minimum time interval : 0.4 ms (set in 0.1 ms increments) Interrupt task startup time: 30 μs Return time to cyclic task : 11 μs	Scheduled Interrupts
No limit However, a maximum of two CJ1W-INT01 Interrupt Input Units can be mounted.	Maximum Number of Connectable Units : Basic I/O Units
Units for up to 96 unit numbers can be mounted. (Unit numbers run from 0 to 95. Units are allocated between 1 and 8 unit numbers.)	Maximum Number of Connectable Units : Special I/O Units
CJ2M-CPU3@: 15 Units max. CJ2M-CPU1@: 16 Units max.	Maximum Number of Connectable Units : CPU Bus Units
2 Units max. * * Supported only by CJ2M CPU Units with unit version 2.0 or later. A Pulse I/O Module must be mounted.	Maximum Number of Connectable Units : Pulse I/O Modules
Slots 0 to 4 on CPU Rack	Maximum Number of Connectable Units : Slots for which interrupts can be used
2,560 bits (160 words) : Words CIO 0000 to CIO 0159	Maximum Number of Expansion Racks (CIO Area) : I/O Area
3,200 bits (200 words) : Words CIO 1000 to CIO 1199	Maximum Number of Expansion Racks (CIO Area) : Link Area
6,400 bits (400 words) : Words CIO 1500 to CIO 1899	Maximum Number of Expansion Racks (CIO Area) : CPU Bus Unit Area
15,360 bits (960 words): Words CIO 2000 to CIO 2959	Maximum Number of Expansion Racks (CIO Area) : Special I/O Unit Area
20 inputs, 12 outputs (CIO 2960 to CIO 2963) * * Supported only by CJ2M CPU Units with unit version 2.0 or later. A Pulse I/O Module must be mounted.	Maximum Number of Expansion Racks (CIO Area) : Pulse I/O Area
1,440 bits (90 words) : Words CIO 3100 to CIO 3189	Maximum Number of Expansion Racks (CIO Area) : Serial PLC Link Words
9,600 bits (600 words) : Words CIO 3200 to CIO 3799	Maximum Number of Expansion Racks (CIO Area) : DeviceNet Area
3,200 bits (200 words) : Words CIO 1300 to CIO 1499 (Cannot be used for external I/O.) 37,504 bits (2,344 words): Words CIO 3800 to CIO 6143 (Cannot be used for external I/O.)	Maximum Number of Expansion Racks (CIO Area) : Internal I/O Area
8,192 bits (512 words): Words W000 to W511 (Cannot be used for external I/O.)	Work Area
8,192 bits (512 words): Words H000 to H511 Bits in this area maintain their ON/OFF status when PLC is turned OFF or operating mode is changed. Words H512 to H1535: These words can be used only for function blocks. They can be used only for function block instances (i.e., they are allocated only for internal variables in function blocks).	Holding Area
Read-only: 31,744 bits (1,984 words) • 7,168 bits (448 words): Words A0 to A447 • 24,576 bits (1,536 words): Words A10000 to A11535 * Read/write: 16,384 bits (1,024 words) in words A448 to A1471 * * A960 to A1471 and A10000 to A11535 cannot be accessed by CPU Bus Units, Special I/O Units, PTs, and Support Software that do not specifically support the CJ2 CPU Units.	Auxiliary Area
16 bits: TR0 to TR15	Temporary Area
4,096 timer numbers (T0000 to T4095 (separate from counters))	Timer Area
4,096 counter numbers (C0000 to C4095 (separate from timers))	Counter Area
32k words * • DM Area words for Special I/O Units: D20000 to D29599 (100 words × 96 Units) • DM Area words for CPU Bus Units: D30000 to D31599 (100 words × 16 Units) * Bits in the EM Area can be addressed either by bit or by word. These bits cannot be addressed by CPU Bus Units, Special I/O Units, PTs, and Support Software that do not specifically support the CJ2 CPU Units.	DM Area
32k words/bank × 4 banks max.: E00_00000 to E3_32767 max. * * Bits in the EM Area can be addressed either by bit or by word. These bits cannot be addressed by CPU Bus Units, Special I/O Units, PTs, and Support Software that do not specifically support the CJ2 CPU Units.	EM Area
CPU11/31 : 32K words × 1 bank CPU12/32 : 32K words × 1 bank CPU13/33 : 32K words × 1 bank CPU14/34 : 32K words × 4 banks CPU15/35 : 32K words × 4 banks	Force-S/R Enabled Banks *1
CPU11/31 : Bank 0 hex CPU12/32 : Bank 0 hex CPU13/33 : Bank 0 hex CPU14/34 : Bank 0 to 3 hex CPU15/35 : Bank 0 to 3 hex	Item
IR0 to IR15 These are special registers for storing PLC memory addresses for indirect addressing. (Index Registers can be set so that they are unique in each task or so that they are shared by all tasks.)	Index Registers
128 flags	Cyclic Task Flag Area
128 MB, 256 MB, or 512 MB	Memory Card
PROGRAM Mode: Programs are not executed. Preparations can be executed prior to program execution in this mode. MONITOR Mode: Programs are executed, and some operations, such as online editing, and changes to present values in I/O memory, are enabled in this mode. RUN Mode: Programs are executed. This is the normal operating mode.	Operating Modes